top of page
APS Wallmount Power Distribution 6Ch x 25A - RCBO, screw terminal input, hardwired
The APW is a wall-mounted version of the popular APS smart power distro. It Features the proven wallmount chassis of other LSC products, providing the same ease of installation and flexibility of configuration options.
The APW should be a standard inclusion in any venue, utilising video screens, moving light power control, LEDs, audio systems or other switched power devices. By using APW, a single switch can be used to power the rig on and off in a controlled manner. This means there is less chance of some parts of the rig being accidentally left energised when not in use, ensuring the maximum service life of expensive equipment.

Wallmount Power Distribution 6Ch x 25A - RCBO, Hardwired Outputs

SKU: APW6/25T
$4,633.19Price
  • Automatic power on/off circuits when DMX is detected RCBO" circuit breaker with earth lea.kage protection (RCD/GFI) for Each circuit RCBO breaker also provides Neutral Disconnect function Staggered power-up of outputs to prevent overloading of supply feed breakers (cascading of multiple units is also possible) Control via DMX512" presence detected turns outputs on and loss of DMX turns outputs off after a preset time delay, i.e. 12 minutes Control via GPI contact closure Control via RDM Cascading start-up for individual units via XLR5 cabling and/or based on unit number Manual override via front panel 10A, 16A and 25A variants Operation on any mains voltage in the range of 90V to 265V per phase Monitoring of input voltages (3-phase), frequency and currents Programmable over-voltage and under-voltage trips to protect loads Voltage and current reporting via RDM 3-phase operation Single-phase operation possible but input current must be limited to 63A in total
  • This item is typically in stock with our supplier and ships within 1-5 Days, though product lead times may vary.

    Please contact us prior to ordering to confirm Availability

bottom of page